71V3577S85BQI8 Overview
A RAM, SRAM-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tape & Reel case as well. Embedded in the FBGA case, memory ics is a single file. On the chip, there is an 4.5Mb (128K x 36) memory, which is the size of the chip's memory. There is a SRAM-format memory used in this device, which is the memory format used by mainstream devices. Featuring an extended operating temperature range of -40°C ~ 85°C (TA), this device allows it to be used in a variety of demanding applications. The device is capable of handling a supply voltage of 3.135 V ~ 3.465 V volts. The recommended mounting type for memory ics is Surface Mount. A total of 165 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3.3V will be necessary. A clock frequency rotation within 87MHz is used for the ic memory chip to rotate data. Similar parts are frequently selected using the ic memory chip's base part number, IDT71V3577. A 165-pin package containing this memory device is used to house this device. The memory device in question has 165 pins, thus indicating that it has 165 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 190mA for this memory component. This chip features all the merits of a conventional chip, but it also features FLOW-THROUGH ARCHITECTURE to improve system performance. 1 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. It is an important component of the -- series memory devices used in a variety of applications. There must not be a minimum operating temperature of less than -40°C for this device. A temperature of no more than 85°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Ideally, this part should be supplied with a voltage of at least 3.135V. An operating voltage of no more than 3.465V is required. A frequency of 87MHz is used to process the data on this memory chip.
71V3577S85BQI8 Features
Package / Case: FBGA
165 Pins
Operating Supply Voltage:3.3V
Additional Feature:FLOW-THROUGH ARCHITECTURE
I/O Type: COMMON
Freguency at 87MHz
87MHz terminals
71V3577S85BQI8 Applications
There are a lot of Integrated Device Technology (IDT)
71V3577S85BQI8 Memory applications.
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
- graphics card
