71V30L35TF Overview
RAM, SDR, SRAM is its memory type. As you can see, it is embedded in LQFP case. There is an 1kB memory capacity on the chip. As you can see from the diagram, the chip is planted with 64 terminations. The memory device designed for this application has been designed to be powered by an 3.3V power supply. It is encased in an 64-pin package that contains this ic memory chip. It has 64 pins indicating it has 64 memory locations. It is noted that the operating supply voltage of this memory is 3.3V. Chips such as this one are mounted using Surface Mount mounting, a straightforward method of mounting that is effective. Memory chip's nominal supply current is 115mA. An address can be read and/or written to one memory address using 2 ports on the chip. In addition to this device, there are COMMON-bit memory mapped I/O port addresses on this device. A minimum operating temperature of 0°C must be met by this device. As a general rule, memory ics is recommended that the product be operated at temperatures no higher than 70°Cc, otherwise, damage could be done to it. This memory ics requires a minimum voltage of 3V. In order for it to operate properly, its voltage should not exceed 3.6V.
71V30L35TF Features
Package / Case: LQFP
64 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON
71V30L35TF Applications
There are a lot of Integrated Device Technology (IDT)
71V30L35TF Memory applications.
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
- graphics card
- hard disk drive (HDD)
