Name: 71V2556S100PFG
Brand: Integrated Device Technology (IDT)
SKU: 71V2556S100PFG
Price: 6.67000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	12 Weeks
Mount	Surface Mount
Package / Case	TQFP
Number of Pins	100
Published	2011
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	100
Terminal Finish	Matte Tin (Sn) - annealed
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Additional Feature	PIPELINED ARCHITECTURE
Subcategory	SRAMs
Technology	CMOS
Terminal Position	QUAD
Terminal Form	FLAT
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	0.65mm
Frequency	100MHz
Time@Peak Reflow Temperature-Max (s)	30
Pin Count	100
Operating Supply Voltage	3.3V
Temperature Grade	COMMERCIAL
Interface	Parallel
Max Supply Voltage	3.465V
Min Supply Voltage	3.135V
Memory Size	512kB
Number of Ports	1
Nominal Supply Current	250mA
Memory Type	RAM, SDR, SRAM
Frequency (Max)	100MHz
Access Time	5 ns
Output Characteristics	3-STATE
Address Bus Width	17b
Density	4.5 Mb
Standby Current-Max	0.04A
I/O Type	COMMON
Sync/Async	Synchronous
Word Size	36b
Length	20mm
Width	14mm
Thickness	1.4mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free

71V2556S100PFG Product Details

71V2556S100PFG Overview

As far as its memory type goes, it falls into the RAM, SDR, SRAM category. TQFP case encloses it. There is 512kB of memory on the chip. There are 100 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 3.3V volt power supply in order to operate properly. In this ic memory chip, there is an 100-pin package that encloses the device. It is worth noting that this memory device has 100 pins, which indicates it has 100 memory locations. This memory chip has an operating supply voltage of 3.3V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 250mA. Despite all its benefits, this memory chip also offers PIPELINED ARCHITECTURE for improved system performance. Using 1 ports, a single memory address can be read and/or written. A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least 0°C. Temperatures over 70°C°C are not recommended. There is a common misconception that this component is a type of SRAMs. If this part is to be used, the minimum supply voltage should not be less than 3.135V volts. The operating voltage of the memory ics shall not exceed 3.465V. There is an 100MHz frequency with which this memory chip processes data. In this Memory chip, the maximum frequency is 100MHz.

71V2556S100PFG Features

Package / Case: TQFP
100 Pins
Operating Supply Voltage:3.3V
Additional Feature:PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 100MHz
100MHz terminals