71V124SA12YG Overview
In this case, the memory type of the device can be classified as RAM, SDR, SRAM - Asynchronous. Case Tube is available. An embedded 32-BSOJ (0.400, 10.16mm Width) case surrounds memory ics. It is estimated that the memory size on the chip is 128kB. As with most mainstream devices, this one uses SRAM-format memory. Due to its wide temperature range of 0°C ~ 70°C (TA), this device is well suited to a wide range of applications that require high performance. With 3 V ~ 3.6 V as the supply voltage, it is capable of handling memory ics. It is recommended to mount it in the Surface Mount mounting type. It is planted on the chip with 32 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 3.3V to be supplied to this ic memory chip in order to operate. A device's base part number, IDT71V124, is often used in order to identify similar components. The ic memory chip comes in a package with 32 pins that allows it to be connected to a computer. The memory device has a total of 32 pins, thus indicating that it has a total of 32 memory locations. It is noted that the operating supply voltage of this memory is 3.3V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 130mA for its nominal supply current when it comes to the memory component. Several ports on this chip are used to access one memory address for reading and writing. I/O port addresses in this device are mapped to COMMON bits from the device's memory. This part, which belongs to the -- series of memory devices, plays an important role in its target applications. In order for this device to function properly, its operating temperature must not be less than 0°C. The temperature should not exceed 70°C degrees Celsius. This memory ics should not be operated with a voltage below 3V volts at the minimum. There shall be a voltage limit of 3.6V for its operation. An 130mA volt maximum current is required to run it.
71V124SA12YG Features
Package / Case: 32-BSOJ (0.400, 10.16mm Width)
32 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON
71V124SA12YG Applications
There are a lot of Integrated Device Technology (IDT)
71V124SA12YG Memory applications.
- networking
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
