71V016SA12PHG8 Overview
RAM, SDR, SRAM - Asynchronous is the type of memory it has. There is a Tape & Reel case available. The TSOP case contains it. The chip has an 128kB memory. The chip has 44 terminations. For a comprehensive working procedure, this part supports as many as 1 functions. In order to operate this memory device, it must be supplied with 3.3V of power. The memory device is enclosed in a package with an 44-pin connector. There are 44 pins on this memory device, which indicates it has 44 memory locations in it. A voltage of 3.3V is noted as the operating supply voltage for this memory. In this chip, Surface Mount mounting is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component is rated at 150mA. A memory address is accessed through 1 ports on this chip. I/O port addresses on this device are mapped to memory addresses of COMMON bits. This device must operate at a minimum temperature of 0°C. Temperatures no higher than 70°C degrees Celsius are recommended for operation. It is recommended that the minimum supply voltage for this part be no less than 3V. Ideally, this part should be supplied with a voltage of at least 3.6V.
71V016SA12PHG8 Features
Package / Case: TSOP
44 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON
71V016SA12PHG8 Applications
There are a lot of Integrated Device Technology (IDT)
71V016SA12PHG8 Memory applications.
- cell phones
- eSRAM
- mainframes
- multimedia computers
- networking
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
