71T75602S150BG Overview
As far as memory types are concerned, RAM, SDR, SRAM is considered to be its memory type. In addition, memory ics is available in a Tray case as well. In the case of BGA, it is embedded within the case. A memory chip with a capacity of 2.3MB is used on this device. There is a mainstream memory format used by this device, which is called SRAM-format memory. This device has an extended operating temperature range of 0°C ~ 70°C (TA), so it's perfect for a wide range of demanding applications. It is capable of handling a voltage supply of 2.375 V ~ 2.625 V. As far as the mounting type is concerned, Surface Mount is recommended. On the chip, there are 119 terminations that are planted. The part supports at least 1 functions to ensure a comprehensive working process. In order to function properly, this ic memory chip should be powered by a voltage of 2.5V. In the memory, there is a clock frequency rotation that ranges 150MHz. In order to select similar parts, typical manufacturers refer to IDT71T75 as the device's base part number. The memory device has an 119-pin package, which encloses it in a small package. I have noticed that the memory device has 119 pins, which indicates that it has 119 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 2.5V. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component has a rating of 215mA. The memory chip also offers PIPELINED ARCHITECTURE to level up system performance despite its merits. The memory chip has 1 ports for granting read/write access to one memory address. There are I/O ports on this memory ics that have COMMON-bit memory mapping. This part plays an important role in applications that target the -- series of memory devices. Temperatures below 0°C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 70°C, otherwise damage to the part may occur as a result of overheating. It is recommended that this part be supplied with at least 2.375V volts. The operating voltage shall not exceed 2.625V. A ic memory chip like this one processes data at a frequency of 150MHz bits per second. The maximum current it can run at is 215mA. A memory chip of this type can operate at a maximum frequency of 150MHz.
71T75602S150BG Features
Package / Case: BGA
119 Pins
Operating Supply Voltage:2.5V
Additional Feature:PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 150MHz
150MHz terminals
71T75602S150BG Applications
There are a lot of Integrated Device Technology (IDT)
71T75602S150BG Memory applications.
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
