71421SA35J Overview
There is a memory type RAM, SDR, SRAM for this type of device. The file is embedded in a PLCC case. This chip has an 2kB size of memory on it, so a lot of data can be stored on it. The chip contains 52 terminations. As many as 1 functions are supported for comprehensive working. An 5V supply is required for this ic memory chip to operate properly. A package of 52 pins is used to protect this memory device. The memory device has 52 pins, which means that it has 52 memory locations, which indicates it is an 52-bit device. This memory runs on an 5V operating supply voltage. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. The nominal supply current of this memory component is 165mA. Although it has all the merits this chip has, it is also equipped with INTERRUPT FLAG; AUTOMATIC POWER-DOWN to give a performance boost to the system. Each memory address is accessed by one of 2 ports on this chip. The power supply needed for this memory chip is only 5V . An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an 0°C operating temperature for this device. The part should not be operated at temperatures above 70°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. The component is usually referred to as a type of SRAMs. This part should have a minimum supply voltage of 4.5V. A maximum voltage of 5.5V shall be allowed for its operating voltage.
71421SA35J Features
Package / Case: PLCC
52 Pins
Operating Supply Voltage:5V
Additional Feature:INTERRUPT FLAG; AUTOMATIC POWER-DOWN
I/O Type: COMMON
71421SA35J Applications
There are a lot of Integrated Device Technology (IDT)
71421SA35J Memory applications.
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
