7140SA55PF Overview
RAM, SRAM is the type of memory it has. The TQFP case contains it. On the chip, there are 64 terminations. The part supports at least 1 functions to ensure a comprehensive working process. A voltage of 5V is required for the operation of this memory device. In this ic memory chip, there is an 64-pin package that encloses the device. A memory device like this has 64 pins, indicating that there are 64 memory locations on the device. According to the datasheet, this memory chip operates at an operating voltage of 5V. It uses Surface Mount mounting, which is an efficient, straightforward mounting method. It is rated 155mA for its nominal supply current when it comes to the memory component. A memory address is accessed through 2 ports on this chip. This memory chip requires a mere 5V of power. A memory map of COMMON bits has been added to the I/O port addresses of this device. There must not be a minimum operating temperature of less than 0°C for this device. The part should not be operated at temperatures above 70°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. It is usually considered a type of SRAMs component. This memory ics should not be operated with a voltage below 4.5V volts at the minimum. The operating voltage shall not exceed 5.5V.
7140SA55PF Features
Package / Case: TQFP
64 Pins
Operating Supply Voltage:5V
I/O Type: COMMON
7140SA55PF Applications
There are a lot of Integrated Device Technology (IDT) 7140SA55PF Memory applications.
- telecommunications
- supercomputers
- Cache memory
- hard disk drive (HDD)
- nonvolatile BIOS memory
- Camcorders
- data buffer
- embedded logic
- main computer memory
- eDRAM
