7134SA70P Overview
As far as its memory type goes, it falls into the RAM, SDR, SRAM category. You can get memory ics in a Bulk case. PDIP case encloses it. There is 4kB of memory on the chip. There are 48 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 5V volt power supply in order to operate properly. In this ic memory chip, there is an 48-pin package that encloses the device. It is worth noting that this memory device has 48 pins, which indicates it has 48 memory locations. This memory chip has an operating supply voltage of 5V. As a result of the Through Hole mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 240mA. Despite all its benefits, this memory chip also offers AUTOMATIC POWER-DOWN for improved system performance. Using 2 ports, a single memory address can be read and/or written. As for the power supply, this memory chip only needs 5V . A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least 0°C. Temperatures over 70°C°C are not recommended. There is a common misconception that this component is a type of SRAMs. If this part is to be used, the minimum supply voltage should not be less than 4.5V volts. The operating voltage of the memory ics shall not exceed 5.5V.
7134SA70P Features
Package / Case: PDIP
48 Pins
Operating Supply Voltage:5V
Additional Feature:AUTOMATIC POWER-DOWN
I/O Type: COMMON
7134SA70P Applications
There are a lot of Integrated Device Technology (IDT)
7134SA70P Memory applications.
- multimedia computers
- networking
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
