Name: 7134LA20J
Brand: Integrated Device Technology (IDT)
SKU: 7134LA20J
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	7 Weeks
Mount	Surface Mount
Package / Case	PLCC
Number of Pins	52
Published	2013
JESD-609 Code	e0
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	52
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn85Pb15)
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Additional Feature	AUTOMATIC POWER-DOWN; BATTERY BACKUP
Subcategory	SRAMs
Technology	CMOS
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	225
Number of Functions	1
Supply Voltage	5V
Pin Count	52
Operating Supply Voltage	5V
Power Supplies	5V
Temperature Grade	COMMERCIAL
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Memory Size	4kB
Number of Ports	2
Nominal Supply Current	240mA
Memory Type	RAM, SDR, SRAM
Access Time	20 ns
Organization	4KX8
Output Characteristics	3-STATE
Address Bus Width	24b
Density	32 kb
Standby Current-Max	0.0015A
I/O Type	COMMON
Sync/Async	Asynchronous
Word Size	8b
Standby Voltage-Min	2V
Length	19mm
Height Seated (Max)	4.57mm
Width	19mm
Thickness	3.63mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Contains Lead

7134LA20J Product Details

7134LA20J Overview

As far as memory types are concerned, RAM, SDR, SRAM is considered to be its memory type. In the case of PLCC, it is embedded within the case. A memory chip with a capacity of 4kB is used on this device. On the chip, there are 52 terminations that are planted. The part supports at least 1 functions to ensure a comprehensive working process. In order to function properly, this ic memory chip should be powered by a voltage of 5V. The memory device has an 52-pin package, which encloses it in a small package. I have noticed that the memory device has 52 pins, which indicates that it has 52 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 5V. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component has a rating of 240mA. The memory chip also offers AUTOMATIC POWER-DOWN; BATTERY BACKUP to level up system performance despite its merits. The memory chip has 2 ports for granting read/write access to one memory address. There is only a single power supply required for this memory chip. There are I/O ports on this memory ics that have COMMON-bit memory mapping. Temperatures below 0°C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 70°C, otherwise damage to the part may occur as a result of overheating. In most cases, this memory ics is regarded as being a type of SRAMs. It is recommended that this part be supplied with at least 4.5V volts. The operating voltage shall not exceed 5.5V.