7133LA25G Overview
As far as its memory type goes, it falls into the RAM, SDR, SRAM category. A memory chip with a capacity of 4kB is used on this device. The chip contains 68 terminations. In total, 1 functions are supported by this part. In order to power this memory device, 5V will be necessary. In this ic memory chip, there is an 68-pin package that encloses the device. The memory device has a total of 68 pins, thus indicating that it has a total of 68 memory locations. It is noted that the operating supply voltage of this memory is 5V. Memory chips configured with Through Hole mounting achieve high efficiency and simplicity. In terms of its nominal supply current, this memory component has a rating of 270mA. 2 ports allow read/write access to one memory address in this chip. As for power supplies, this memory chip requires just 5V . This device has COMMON-bit memory mapped I/O port addresses. There must be at least an 0°C operating temperature for this device. Temperatures no higher than 70°C degrees Celsius are recommended for operation. It is usually considered a type of SRAMs component. This memory ics requires a minimum voltage of 4.5V. Its operating voltage shall not exceed 5.5V.
7133LA25G Features
68 Pins
Operating Supply Voltage:5V
I/O Type: COMMON
7133LA25G Applications
There are a lot of Integrated Device Technology (IDT) 7133LA25G Memory applications.
- hard disk drive (HDD)
- graphics card
- mainframes
- personal computers
- networks
- cell phones
- multimedia computers
- telecommunications
- Cache memory
- data buffer
