Welcome to Hotenda.com Online Store!

logo
userjoin
Home

71321SA55JI8

71321SA55JI8

71321SA55JI8

Integrated Device Technology (IDT)

5V V Surface Mount 52 Pin Memory IC 16 kb kb 19mm mm 190mA mA 8b b

SOT-23

71321SA55JI8 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Factory Lead Time 7 Weeks
Mount Surface Mount
Package / Case PLCC
Number of Pins 52
Published 1997
JESD-609 Code e0
Pbfree Code no
Part StatusActive
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 52
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature85°C
Min Operating Temperature -40°C
Additional FeatureINTERRUPT FLAG; AUTOMATIC POWER-DOWN
Subcategory SRAMs
Technology CMOS
Terminal Position QUAD
Terminal FormJ BEND
Peak Reflow Temperature (Cel) 225
Number of Functions 1
Supply Voltage 5V
Pin Count52
Operating Supply Voltage5V
Power Supplies5V
Temperature GradeINDUSTRIAL
Interface Parallel
Max Supply Voltage5.5V
Min Supply Voltage4.5V
Memory Size2kB
Number of Ports2
Nominal Supply Current190mA
Memory TypeRAM, SDR, SRAM
Access Time 55 ns
Output Characteristics 3-STATE
Address Bus Width22b
Density 16 kb
Standby Current-Max 0.03A
I/O Type COMMON
Sync/Async Asynchronous
Word Size8b
Length 19mm
Width 19mm
Thickness 3.63mm
Radiation HardeningNo
RoHS StatusRoHS Compliant
Lead Free Contains Lead
In-Stock:3909 items

71321SA55JI8 Product Details

71321SA55JI8 Overview


A RAM, SDR, SRAM-type memory can be classified as the memory type of this device. Embedded in the PLCC case, memory ics is a single file. On the chip, there is an 2kB memory, which is the size of the chip's memory. A total of 52 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 5V will be necessary. A 52-pin package containing this memory device is used to house this device. The memory device in question has 52 pins, thus indicating that it has 52 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 5V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 190mA for this memory component. This chip features all the merits of a conventional chip, but it also features INTERRUPT FLAG; AUTOMATIC POWER-DOWN to improve system performance. 2 ports allow read/write access to one memory address in this chip. As for power supplies, this memory chip requires just 5V . As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than -40°C for this device. A temperature of no more than 85°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Usually, this memory ics falls under the SRAMs component category. Ideally, this part should be supplied with a voltage of at least 4.5V. An operating voltage of no more than 5.5V is required.

71321SA55JI8 Features


Package / Case: PLCC
52 Pins
Operating Supply Voltage:5V
Additional Feature:INTERRUPT FLAG; AUTOMATIC POWER-DOWN
I/O Type: COMMON


71321SA55JI8 Applications


There are a lot of Integrated Device Technology (IDT)
71321SA55JI8 Memory applications.


  • supercomputers
  • telecommunications
  • workstations,
  • DVD disk buffer
  • data buffer
  • nonvolatile BIOS memory
  • Camcorders
  • embedded logic
  • eDRAM
  • graphics card

Get Subscriber

Enter Your Email Address, Get the Latest News