71256S45DB Overview
RAM, SDR, SRAM - Asynchronous is its memory type. As you can see, it is embedded in CDIP case. There is an 32kB memory capacity on the chip. As you can see from the diagram, the chip is planted with 28 terminations. In total, 1 functions are supported by this part. The memory device designed for this application has been designed to be powered by an 5V power supply. It is encased in an 28-pin package that contains this ic memory chip. It has 28 pins indicating it has 28 memory locations. It is noted that the operating supply voltage of this memory is 5V. Chips such as this one are mounted using Through Hole mounting, a straightforward method of mounting that is effective. Memory chip's nominal supply current is 135mA. An address can be read and/or written to one memory address using 1 ports on the chip. This memory chip requires a mere 5V of power. In addition to this device, there are COMMON-bit memory mapped I/O port addresses on this device. A minimum operating temperature of -55°C must be met by this device. As a general rule, memory ics is recommended that the product be operated at temperatures no higher than 125°Cc, otherwise, damage could be done to it. This memory ics requires a minimum voltage of 4.5V. In order for it to operate properly, its voltage should not exceed 5.5V.
71256S45DB Features
Package / Case: CDIP
28 Pins
Operating Supply Voltage:5V
I/O Type: COMMON
71256S45DB Applications
There are a lot of Integrated Device Technology (IDT)
71256S45DB Memory applications.
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
- graphics card
- hard disk drive (HDD)
