71256L45DB Overview
As far as memory types are concerned, RAM, SDR, SRAM - Asynchronous is considered to be its memory type. In the case of CDIP, it is embedded within the case. A memory chip with a capacity of 32kB is used on this device. On the chip, there are 28 terminations that are planted. The part supports at least 1 functions to ensure a comprehensive working process. In order to function properly, this ic memory chip should be powered by a voltage of 5V. The memory device has an 28-pin package, which encloses it in a small package. I have noticed that the memory device has 28 pins, which indicates that it has 28 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 5V. The memory chip has 1 ports for granting read/write access to one memory address. There is only a single power supply required for this memory chip. There are I/O ports on this memory ics that have COMMON-bit memory mapping. Temperatures below -55°C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 125°C, otherwise damage to the part may occur as a result of overheating. In most cases, this memory ics is regarded as being a type of SRAMs. It is recommended that this part be supplied with at least 4.5V volts. The operating voltage shall not exceed 5.5V.
71256L45DB Features
Package / Case: CDIP
28 Pins
Operating Supply Voltage:5V
I/O Type: COMMON
71256L45DB Applications
There are a lot of Integrated Device Technology (IDT)
71256L45DB Memory applications.
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
