70V9279L12PRF Overview
As far as memory types are concerned, RAM, SDR, SRAM is considered to be its memory type. In the case of TQFP, it is embedded within the case. A memory chip with a capacity of 64kB is used on this device. On the chip, there are 128 terminations that are planted. In order to function properly, this ic memory chip should be powered by a voltage of 3.3V. The memory device has an 128-pin package, which encloses it in a small package. I have noticed that the memory device has 128 pins, which indicates that it has 128 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 3.3V. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component has a rating of 205mA. The memory chip has 2 ports for granting read/write access to one memory address. There are I/O ports on this memory ics that have COMMON-bit memory mapping. Temperatures below 0°C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 70°C, otherwise damage to the part may occur as a result of overheating. In most cases, this memory ics is regarded as being a type of SRAMs. It is recommended that this part be supplied with at least 3V volts. The operating voltage shall not exceed 3.6V. A ic memory chip like this one processes data at a frequency of 33.3MHz bits per second.
70V9279L12PRF Features
Package / Case: TQFP
128 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON
Freguency at 33.3MHz
33.3MHz terminals
70V9279L12PRF Applications
There are a lot of Integrated Device Technology (IDT)
70V9279L12PRF Memory applications.
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
