Welcome to Hotenda.com Online Store!

logo
userjoin
Home

70V7519S166DRI

70V7519S166DRI

70V7519S166DRI

Integrated Device Technology (IDT)

Surface Mount 208 Pin Memory IC 9 Mb kb 28mm mm 830mA mA 36b b

SOT-23

70V7519S166DRI Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Factory Lead Time 7 Weeks
Mount Surface Mount
Package / Case PQFP
Number of Pins 208
PackagingBulk
Published 2009
JESD-609 Code e0
Pbfree Code no
Part StatusActive
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 208
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature85°C
Min Operating Temperature -40°C
Additional FeatureFLOW-THROUGH OR PIPELINED ARCHITECTURE
Subcategory SRAMs
Technology CMOS
Terminal Position QUAD
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 225
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch0.5mm
Frequency 166MHz
Time@Peak Reflow Temperature-Max (s) 20
Pin Count208
Operating Supply Voltage3.3V
Temperature GradeINDUSTRIAL
Interface Parallel
Max Supply Voltage3.45V
Min Supply Voltage3.15V
Memory Size1.1MB
Number of Ports2
Nominal Supply Current830mA
Memory TypeRAM, SDR, SRAM
Access Time 20 ns
Output Characteristics 3-STATE
Address Bus Width18b
Density 9 Mb
Standby Current-Max 0.04A
I/O Type COMMON
Sync/Async Synchronous
Word Size36b
Length 28mm
Height Seated (Max) 4.1mm
Width 28mm
Thickness 3.5mm
Radiation HardeningNo
RoHS StatusRoHS Compliant
Lead Free Contains Lead
In-Stock:2395 items

70V7519S166DRI Product Details

70V7519S166DRI Overview


As far as its memory type goes, it falls into the RAM, SDR, SRAM category. You can get memory ics in a Bulk case. PQFP case encloses it. There is 1.1MB of memory on the chip. There are 208 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 3.3V volt power supply in order to operate properly. In this ic memory chip, there is an 208-pin package that encloses the device. It is worth noting that this memory device has 208 pins, which indicates it has 208 memory locations. This memory chip has an operating supply voltage of 3.3V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 830mA. Despite all its benefits, this memory chip also offers FLOW-THROUGH OR PIPELINED ARCHITECTURE for improved system performance. Using 2 ports, a single memory address can be read and/or written. A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least -40°C. Temperatures over 85°C°C are not recommended. There is a common misconception that this component is a type of SRAMs. If this part is to be used, the minimum supply voltage should not be less than 3.15V volts. The operating voltage of the memory ics shall not exceed 3.45V. There is an 166MHz frequency with which this memory chip processes data.

70V7519S166DRI Features


Package / Case: PQFP
208 Pins
Operating Supply Voltage:3.3V
Additional Feature:FLOW-THROUGH OR PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 166MHz
166MHz terminals


70V7519S166DRI Applications


There are a lot of Integrated Device Technology (IDT)
70V7519S166DRI Memory applications.


  • multimedia computers
  • networking
  • personal computers
  • servers
  • supercomputers
  • telecommunications
  • workstations,
  • DVD disk buffer
  • data buffer
  • nonvolatile BIOS memory

Get Subscriber

Enter Your Email Address, Get the Latest News