70V657S10DR Overview
There is a memory type RAM, SDR, SRAM for this type of device. The file is embedded in a PQFP case. This chip has an 128kB size of memory on it, so a lot of data can be stored on it. The chip contains 208 terminations. As many as 1 functions are supported for comprehensive working. An 3.3V supply is required for this ic memory chip to operate properly. A package of 208 pins is used to protect this memory device. The memory device has 208 pins, which means that it has 208 memory locations, which indicates it is an 208-bit device. This memory runs on an 3.3V operating supply voltage. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. The nominal supply current of this memory component is 500mA. Each memory address is accessed by one of 2 ports on this chip. An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an 0°C operating temperature for this device. The part should not be operated at temperatures above 70°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. The component is usually referred to as a type of SRAMs. This part should have a minimum supply voltage of 3.15V. A maximum voltage of 3.45V shall be allowed for its operating voltage.
70V657S10DR Features
Package / Case: PQFP
208 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON
70V657S10DR Applications
There are a lot of Integrated Device Technology (IDT)
70V657S10DR Memory applications.
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
