70V631S10PRFG Overview
A RAM, SDR, SRAM-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Bulk case as well. Embedded in the TQFP case, memory ics is a single file. On the chip, there is an 512kB memory, which is the size of the chip's memory. A total of 128 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3.3V will be necessary. A 128-pin package containing this memory device is used to house this device. The memory device in question has 128 pins, thus indicating that it has 128 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 500mA for this memory component. 2 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than 0°C for this device. A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Ideally, this part should be supplied with a voltage of at least 3.15V. An operating voltage of no more than 3.45V is required.
70V631S10PRFG Features
Package / Case: TQFP
128 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON
70V631S10PRFG Applications
There are a lot of Integrated Device Technology (IDT)
70V631S10PRFG Memory applications.
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
- graphics card
