70V35L20PF Overview
RAM, SDR, SRAM is the type of memory it has. There is a Bulk case available. The TQFP case contains it. The chip has an 18kB memory. The chip has 100 terminations. For a comprehensive working procedure, this part supports as many as 1 functions. In order to operate this memory device, it must be supplied with 3.3V of power. The memory device is enclosed in a package with an 100-pin connector. There are 100 pins on this memory device, which indicates it has 100 memory locations in it. A voltage of 3.3V is noted as the operating supply voltage for this memory. A memory address is accessed through 2 ports on this chip. I/O port addresses on this device are mapped to memory addresses of COMMON bits. This device must operate at a minimum temperature of 0°C. Temperatures no higher than 70°C degrees Celsius are recommended for operation. A maximum supply current of 0.175mA can be used to operate this device. It is usually considered a type of SRAMs component. It is recommended that the minimum supply voltage for this part be no less than 3V. Ideally, this part should be supplied with a voltage of at least 3.6V.
70V35L20PF Features
Package / Case: TQFP
100 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON
70V35L20PF Applications
There are a lot of Integrated Device Technology (IDT)
70V35L20PF Memory applications.
- cell phones
- eSRAM
- mainframes
- multimedia computers
- networking
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
