70V3599S166BFG Overview
RAM, SDR, SRAM is the type of memory it has. The chip has an 512kB memory. The chip has 208 terminations. For a comprehensive working procedure, this part supports as many as 1 functions. In order to operate this memory device, it must be supplied with 3.3V of power. The memory device is enclosed in a package with an 208-pin connector. There are 208 pins on this memory device, which indicates it has 208 memory locations in it. A voltage of 3.3V is noted as the operating supply voltage for this memory. In this chip, Surface Mount mounting is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component is rated at 500mA. Despite all its merits, this chip also features PIPELINED OR FLOW-THROUGH ARCHITECTURE to boost system performance. A memory address is accessed through 2 ports on this chip. I/O port addresses on this device are mapped to memory addresses of COMMON bits. This device must operate at a minimum temperature of 0°C. Temperatures no higher than 70°C degrees Celsius are recommended for operation. It is usually considered a type of SRAMs component. It is recommended that the minimum supply voltage for this part be no less than 3.15V. Ideally, this part should be supplied with a voltage of at least 3.45V. Data is processed by this memory ics at a frequency of 166MHz. A maximum current of 500mA can be used to run it.
70V3599S166BFG Features
208 Pins
Operating Supply Voltage:3.3V
Additional Feature:PIPELINED OR FLOW-THROUGH ARCHITECTURE
I/O Type: COMMON
Freguency at 166MHz
166MHz terminals
70V3599S166BFG Applications
There are a lot of Integrated Device Technology (IDT)
70V3599S166BFG Memory applications.
- cell phones
- eSRAM
- mainframes
- multimedia computers
- networking
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
