70V3389S5BCI8 Overview
A RAM, SRAM-type memory can be classified as the memory type of this device. In addition, memory ics is available in a Tape & Reel case as well. A total of 256 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3.3V will be necessary. A 256-pin package containing this memory device is used to house this device. The memory device in question has 256 pins, thus indicating that it has 256 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. The memory chip utilizes a straightforward, high-efficiency mounting method, Surface Mount mounting. There is a nominal supply current rating of 415mA for this memory component. 2 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than -40°C for this device. A temperature of no more than 85°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Usually, this memory ics falls under the SRAMs component category. Ideally, this part should be supplied with a voltage of at least 3.15V. An operating voltage of no more than 3.45V is required. A frequency of 100MHz is used to process the data on this memory chip.
70V3389S5BCI8 Features
256 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON
Freguency at 100MHz
100MHz terminals
70V3389S5BCI8 Applications
There are a lot of Integrated Device Technology (IDT)
70V3389S5BCI8 Memory applications.
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
- graphics card
