70V25L15J Overview
As far as its memory type goes, it falls into the RAM, SDR, SRAM category. PLCC case encloses it. There is 16kB of memory on the chip. There are 84 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 3.3V volt power supply in order to operate properly. In this ic memory chip, there is an 84-pin package that encloses the device. It is worth noting that this memory device has 84 pins, which indicates it has 84 memory locations. This memory chip has an operating supply voltage of 3.3V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 185mA. Using 2 ports, a single memory address can be read and/or written. A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least 0°C. Temperatures over 70°C°C are not recommended. There is a common misconception that this component is a type of SRAMs. If this part is to be used, the minimum supply voltage should not be less than 3V volts. The operating voltage of the memory ics shall not exceed 3.6V.
70V25L15J Features
Package / Case: PLCC
84 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON
70V25L15J Applications
There are a lot of Integrated Device Technology (IDT)
70V25L15J Memory applications.
- multimedia computers
- networking
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
