70V05S25J8 Overview
In this case, the memory type of the device can be classified as RAM, SDR, SRAM. An embedded PLCC case surrounds memory ics. It is estimated that the memory size on the chip is 8kB. It is planted on the chip with 68 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 3.3V to be supplied to this ic memory chip in order to operate. The ic memory chip comes in a package with 68 pins that allows it to be connected to a computer. The memory device has a total of 68 pins, thus indicating that it has a total of 68 memory locations. It is noted that the operating supply voltage of this memory is 3.3V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 190mA for its nominal supply current when it comes to the memory component. This chip is not only loaded with advantages, but it also comes with INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN, which boosts the performance of your system. Several ports on this chip are used to access one memory address for reading and writing. I/O port addresses in this device are mapped to COMMON bits from the device's memory. In order for this device to function properly, its operating temperature must not be less than 0°C. The temperature should not exceed 70°C degrees Celsius. SRAMs components are usually considered types of this component. This memory ics should not be operated with a voltage below 3V volts at the minimum. There shall be a voltage limit of 3.6V for its operation.
70V05S25J8 Features
Package / Case: PLCC
68 Pins
Operating Supply Voltage:3.3V
Additional Feature:INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN
I/O Type: COMMON
70V05S25J8 Applications
There are a lot of Integrated Device Technology (IDT)
70V05S25J8 Memory applications.
- networking
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
