70V05S15J Overview
A RAM, SDR, SRAM-type memory can be classified as the memory type of this device. Embedded in the PLCC case, memory ics is a single file. On the chip, there is an 8kB memory, which is the size of the chip's memory. A total of 68 terminations have been planted on the chip. The comprehensive working procedure of this part involves 1 functions. In order to power this memory device, 3.3V will be necessary. A 68-pin package containing this memory device is used to house this device. The memory device in question has 68 pins, thus indicating that it has 68 memory locations that can be accessed. There is a note indicating that this memory chip operates at an 3.3V volt supply voltage. 2 ports allow read/write access to one memory address in this chip. As part of the design, the I/O port addresses are mapped into the memory using an COMMON-bit number. There must not be a minimum operating temperature of less than 0°C for this device. A temperature of no more than 70°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Usually, this memory ics falls under the SRAMs component category. Ideally, this part should be supplied with a voltage of at least 3V. An operating voltage of no more than 3.6V is required.
70V05S15J Features
Package / Case: PLCC
68 Pins
Operating Supply Voltage:3.3V
I/O Type: COMMON
70V05S15J Applications
There are a lot of Integrated Device Technology (IDT)
70V05S15J Memory applications.
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
- graphics card
