70T651S10BCI Overview
As far as its memory type goes, it falls into the RAM, SDR, SRAM category. There is 1.1MB of memory on the chip. There are 256 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 2.5V volt power supply in order to operate properly. In this ic memory chip, there is an 256-pin package that encloses the device. It is worth noting that this memory device has 256 pins, which indicates it has 256 memory locations. This memory chip has an operating supply voltage of 2.5V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 445mA. Using 2 ports, a single memory address can be read and/or written. A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least -40°C. Temperatures over 85°C°C are not recommended. If this part is to be used, the minimum supply voltage should not be less than 2.4V volts. The operating voltage of the memory ics shall not exceed 2.6V.
70T651S10BCI Features
256 Pins
Operating Supply Voltage:2.5V
I/O Type: COMMON
70T651S10BCI Applications
There are a lot of Integrated Device Technology (IDT)
70T651S10BCI Memory applications.
- multimedia computers
- networking
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
