70T633S10BCI Overview
RAM, SDR, SRAM is its memory type. There is an 1.1MB memory capacity on the chip. As you can see from the diagram, the chip is planted with 256 terminations. In total, 1 functions are supported by this part. The memory device designed for this application has been designed to be powered by an 2.5V power supply. It is encased in an 256-pin package that contains this ic memory chip. It has 256 pins indicating it has 256 memory locations. It is noted that the operating supply voltage of this memory is 2.5V. Chips such as this one are mounted using Surface Mount mounting, a straightforward method of mounting that is effective. Memory chip's nominal supply current is 445mA. An address can be read and/or written to one memory address using 2 ports on the chip. In addition to this device, there are COMMON-bit memory mapped I/O port addresses on this device. A minimum operating temperature of -40°C must be met by this device. As a general rule, memory ics is recommended that the product be operated at temperatures no higher than 85°Cc, otherwise, damage could be done to it. Generally, this component is considered a type of SRAMs. This memory ics requires a minimum voltage of 2.4V. In order for it to operate properly, its voltage should not exceed 2.6V.
70T633S10BCI Features
256 Pins
Operating Supply Voltage:2.5V
I/O Type: COMMON
70T633S10BCI Applications
There are a lot of Integrated Device Technology (IDT)
70T633S10BCI Memory applications.
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
- graphics card
- hard disk drive (HDD)
