70T3799MS133BBG Overview
As far as its memory type goes, it falls into the RAM, SDR, SRAM category. BGA case encloses it. There is 1.1MB of memory on the chip. There are 324 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 2.5V volt power supply in order to operate properly. In this ic memory chip, there is an 324-pin package that encloses the device. It is worth noting that this memory device has 324 pins, which indicates it has 324 memory locations. This memory chip has an operating supply voltage of 2.5V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 740mA. Despite all its benefits, this memory chip also offers PIPELINED OR FLOW-THROUGH ARCHITECTURE for improved system performance. Using 2 ports, a single memory address can be read and/or written. A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least 0°C. Temperatures over 70°C°C are not recommended. If this part is to be used, the minimum supply voltage should not be less than 2.4V volts. The operating voltage of the memory ics shall not exceed 2.6V. There is an 133MHz frequency with which this memory chip processes data. In this Memory chip, the maximum frequency is 133MHz.
70T3799MS133BBG Features
Package / Case: BGA
324 Pins
Operating Supply Voltage:2.5V
Additional Feature:PIPELINED OR FLOW-THROUGH ARCHITECTURE
I/O Type: COMMON
Freguency at 133MHz
133MHz terminals
70T3799MS133BBG Applications
There are a lot of Integrated Device Technology (IDT)
70T3799MS133BBG Memory applications.
- multimedia computers
- networking
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
