70T3399S133BFI Overview
As far as memory types are concerned, RAM, SRAM is considered to be its memory type. On the chip, there are 208 terminations that are planted. The part supports at least 1 functions to ensure a comprehensive working process. In order to function properly, this ic memory chip should be powered by a voltage of 2.5V. The memory device has an 208-pin package, which encloses it in a small package. I have noticed that the memory device has 208 pins, which indicates that it has 208 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 2.5V. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component has a rating of 450mA. The memory chip also offers FLOW-THROUGH OR PIPELINED ARCHITECTURE to level up system performance despite its merits. The memory chip has 2 ports for granting read/write access to one memory address. There are I/O ports on this memory ics that have COMMON-bit memory mapping. Temperatures below -40°C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 85°C, otherwise damage to the part may occur as a result of overheating. In most cases, this memory ics is regarded as being a type of SRAMs. It is recommended that this part be supplied with at least 2.4V volts. The operating voltage shall not exceed 2.6V. A ic memory chip like this one processes data at a frequency of 133MHz bits per second.
70T3399S133BFI Features
208 Pins
Operating Supply Voltage:2.5V
Additional Feature:FLOW-THROUGH OR PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 133MHz
133MHz terminals
70T3399S133BFI Applications
There are a lot of Integrated Device Technology (IDT)
70T3399S133BFI Memory applications.
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
