Name: 709279L12PFI
Brand: Integrated Device Technology (IDT)
SKU: 709279L12PFI
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	7 Weeks
Mount	Surface Mount
Package / Case	TQFP
Number of Pins	100
Published	2009
JESD-609 Code	e0
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	100
Terminal Finish	Tin/Lead (Sn85Pb15)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Additional Feature	FLOW-THROUGH OR PIPELINED ARCHITECTURE
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.5mm
Frequency	33.3MHz
Time@Peak Reflow Temperature-Max (s)	20
Pin Count	100
Operating Supply Voltage	5V
Power Supplies	5V
Temperature Grade	INDUSTRIAL
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Memory Size	64kB
Number of Ports	2
Nominal Supply Current	340mA
Memory Type	RAM, SDR, SRAM
Frequency (Max)	33.3MHz
Access Time	12 ns
Output Characteristics	3-STATE
Address Bus Width	30b
Density	512 kb
Standby Current-Max	0.005A
I/O Type	COMMON
Sync/Async	Synchronous
Word Size	16b
Length	14mm
Height Seated (Max)	1.6mm
Width	14mm
Thickness	1.4mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Contains Lead

709279L12PFI Product Details

709279L12PFI Overview

As far as its memory type goes, it falls into the RAM, SDR, SRAM category. TQFP case encloses it. There is 64kB of memory on the chip. There are 100 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 5V volt power supply in order to operate properly. In this ic memory chip, there is an 100-pin package that encloses the device. It is worth noting that this memory device has 100 pins, which indicates it has 100 memory locations. This memory chip has an operating supply voltage of 5V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 340mA. Despite all its benefits, this memory chip also offers FLOW-THROUGH OR PIPELINED ARCHITECTURE for improved system performance. Using 2 ports, a single memory address can be read and/or written. As for the power supply, this memory chip only needs 5V . A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least -40°C. Temperatures over 85°C°C are not recommended. If this part is to be used, the minimum supply voltage should not be less than 4.5V volts. The operating voltage of the memory ics shall not exceed 5.5V. There is an 33.3MHz frequency with which this memory chip processes data. In this Memory chip, the maximum frequency is 33.3MHz.

709279L12PFI Features

Package / Case: TQFP
100 Pins
Operating Supply Voltage:5V
Additional Feature:FLOW-THROUGH OR PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 33.3MHz
33.3MHz terminals