Welcome to Hotenda.com Online Store!

logo
userjoin
Home

70914S15PF8

70914S15PF8

70914S15PF8

Integrated Device Technology (IDT)

5V V Surface Mount 80 Pin Memory IC 36 kb kb 14mm mm 300mA mA 9b b

SOT-23

70914S15PF8 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Factory Lead Time 7 Weeks
Mount Surface Mount
Package / Case TQFP
Number of Pins 80
Published 2010
JESD-609 Code e0
Pbfree Code no
Part StatusActive
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 80
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature70°C
Min Operating Temperature 0°C
Additional FeatureAUTOMATIC POWER-DOWN; LOW POWER STANDBY MODE; SELF TIMED WRITE
Subcategory SRAMs
Technology CMOS
Terminal Position QUAD
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Terminal Pitch0.65mm
Frequency 50MHz
Time@Peak Reflow Temperature-Max (s) 20
Pin Count80
Operating Supply Voltage5V
Power Supplies5V
Temperature GradeCOMMERCIAL
Interface Parallel
Max Supply Voltage5.5V
Min Supply Voltage4.5V
Memory Size4.5kB
Number of Ports2
Nominal Supply Current300mA
Memory TypeRAM, SDR, SRAM
Access Time 15 ns
Organization 4KX9
Output Characteristics 3-STATE
Address Bus Width24b
Density 36 kb
Standby Current-Max 0.015A
I/O Type COMMON
Sync/Async Synchronous
Word Size9b
Length 14mm
Height Seated (Max) 1.6mm
Width 14mm
Thickness 1.4mm
Radiation HardeningNo
RoHS StatusRoHS Compliant
Lead Free Contains Lead
In-Stock:3791 items

70914S15PF8 Product Details

70914S15PF8 Overview


There is a memory type RAM, SDR, SRAM for this type of device. The file is embedded in a TQFP case. This chip has an 4.5kB size of memory on it, so a lot of data can be stored on it. The chip contains 80 terminations. As many as 1 functions are supported for comprehensive working. An 5V supply is required for this ic memory chip to operate properly. A package of 80 pins is used to protect this memory device. The memory device has 80 pins, which means that it has 80 memory locations, which indicates it is an 80-bit device. This memory runs on an 5V operating supply voltage. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. The nominal supply current of this memory component is 300mA. Although it has all the merits this chip has, it is also equipped with AUTOMATIC POWER-DOWN; LOW POWER STANDBY MODE; SELF TIMED WRITE to give a performance boost to the system. Each memory address is accessed by one of 2 ports on this chip. The power supply needed for this memory chip is only 5V . An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an 0°C operating temperature for this device. The part should not be operated at temperatures above 70°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. The component is usually referred to as a type of SRAMs. This part should have a minimum supply voltage of 4.5V. A maximum voltage of 5.5V shall be allowed for its operating voltage. As a result of the frequency of this memory chip, data can be processed at a rate of 50MHz.

70914S15PF8 Features


Package / Case: TQFP
80 Pins
Operating Supply Voltage:5V
Additional Feature:AUTOMATIC POWER-DOWN; LOW POWER STANDBY MODE; SELF TIMED WRITE
I/O Type: COMMON
Freguency at 50MHz
50MHz terminals


70914S15PF8 Applications


There are a lot of Integrated Device Technology (IDT)
70914S15PF8 Memory applications.


  • personal computers
  • servers
  • supercomputers
  • telecommunications
  • workstations,
  • DVD disk buffer
  • data buffer
  • nonvolatile BIOS memory
  • Camcorders
  • embedded logic

Get Subscriber

Enter Your Email Address, Get the Latest News