Name: 709089S15PF
Brand: Integrated Device Technology (IDT)
SKU: 709089S15PF
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	7 Weeks
Mount	Surface Mount
Package / Case	TQFP
Number of Pins	100
Published	2010
JESD-609 Code	e0
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	100
Terminal Finish	Tin/Lead (Sn85Pb15)
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Additional Feature	FLOW-THROUGH OR PIPELINED ARCHITECTURE
Subcategory	SRAMs
Technology	CMOS
Terminal Position	QUAD
Terminal Form	FLAT
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.5mm
Frequency	28.5MHz
Time@Peak Reflow Temperature-Max (s)	20
Pin Count	100
Operating Supply Voltage	5V
Power Supplies	5V
Temperature Grade	COMMERCIAL
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Memory Size	64kB
Number of Ports	2
Nominal Supply Current	325mA
Memory Type	RAM, SDR, SRAM
Access Time	15 ns
Organization	64KX8
Output Characteristics	3-STATE
Address Bus Width	32b
Density	512 kb
Standby Current-Max	0.015A
I/O Type	COMMON
Sync/Async	Synchronous
Word Size	8b
Length	14mm
Height Seated (Max)	1.6mm
Width	14mm
Thickness	1.4mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Contains Lead

709089S15PF Product Details

709089S15PF Overview

There is a memory type RAM, SDR, SRAM for this type of device. The file is embedded in a TQFP case. This chip has an 64kB size of memory on it, so a lot of data can be stored on it. The chip contains 100 terminations. As many as 1 functions are supported for comprehensive working. An 5V supply is required for this ic memory chip to operate properly. A package of 100 pins is used to protect this memory device. The memory device has 100 pins, which means that it has 100 memory locations, which indicates it is an 100-bit device. This memory runs on an 5V operating supply voltage. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. The nominal supply current of this memory component is 325mA. Although it has all the merits this chip has, it is also equipped with FLOW-THROUGH OR PIPELINED ARCHITECTURE to give a performance boost to the system. Each memory address is accessed by one of 2 ports on this chip. The power supply needed for this memory chip is only 5V . An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an 0°C operating temperature for this device. The part should not be operated at temperatures above 70°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. The component is usually referred to as a type of SRAMs. This part should have a minimum supply voltage of 4.5V. A maximum voltage of 5.5V shall be allowed for its operating voltage. As a result of the frequency of this memory chip, data can be processed at a rate of 28.5MHz.

709089S15PF Features

Package / Case: TQFP
100 Pins
Operating Supply Voltage:5V
Additional Feature:FLOW-THROUGH OR PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 28.5MHz
28.5MHz terminals