Welcome to Hotenda.com Online Store!

logo
userjoin
Home

709089L15PF8

709089L15PF8

709089L15PF8

Integrated Device Technology (IDT)

5V V Surface Mount 100 Pin Memory IC 512 kb kb 14mm mm 285mA mA 8b b

SOT-23

709089L15PF8 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Factory Lead Time 7 Weeks
Mount Surface Mount
Package / Case TQFP
Number of Pins 100
Weight 657.000198mg
Published 2010
JESD-609 Code e0
Pbfree Code no
Part StatusActive
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 100
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature70°C
Min Operating Temperature 0°C
Additional FeatureFLOW-THROUGH OR PIPELINED ARCHITECTURE
Subcategory SRAMs
Technology CMOS
Terminal Position QUAD
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Terminal Pitch0.5mm
Frequency 28.5MHz
Time@Peak Reflow Temperature-Max (s) 20
Pin Count100
Operating Supply Voltage5V
Power Supplies5V
Temperature GradeCOMMERCIAL
Interface Parallel
Max Supply Voltage5.5V
Min Supply Voltage4.5V
Memory Size64kB
Number of Ports2
Nominal Supply Current285mA
Memory TypeRAM, SDR, SRAM
Max Supply Current 285mA
Access Time 15 ns
Organization 64KX8
Output Characteristics 3-STATE
Address Bus Width32b
Density 512 kb
Standby Current-Max 0.005A
I/O Type COMMON
Sync/Async Synchronous
Word Size8b
Height 1.4mm
Length 14mm
Width 14mm
Thickness 1.4mm
Radiation HardeningNo
RoHS StatusRoHS Compliant
Lead Free Contains Lead
In-Stock:2809 items

709089L15PF8 Product Details

709089L15PF8 Overview


There is a memory type RAM, SDR, SRAM for this type of device. The file is embedded in a TQFP case. This chip has an 64kB size of memory on it, so a lot of data can be stored on it. The chip contains 100 terminations. As many as 1 functions are supported for comprehensive working. An 5V supply is required for this ic memory chip to operate properly. A package of 100 pins is used to protect this memory device. The memory device has 100 pins, which means that it has 100 memory locations, which indicates it is an 100-bit device. This memory runs on an 5V operating supply voltage. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. The nominal supply current of this memory component is 285mA. Although it has all the merits this chip has, it is also equipped with FLOW-THROUGH OR PIPELINED ARCHITECTURE to give a performance boost to the system. Each memory address is accessed by one of 2 ports on this chip. The power supply needed for this memory chip is only 5V . An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an 0°C operating temperature for this device. The part should not be operated at temperatures above 70°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. The component is usually referred to as a type of SRAMs. This part should have a minimum supply voltage of 4.5V. A maximum voltage of 5.5V shall be allowed for its operating voltage. As a result of the frequency of this memory chip, data can be processed at a rate of 28.5MHz. In order for ic memory chip to run, it needs a maximum current of 285mA .

709089L15PF8 Features


Package / Case: TQFP
100 Pins
Operating Supply Voltage:5V
Additional Feature:FLOW-THROUGH OR PIPELINED ARCHITECTURE
I/O Type: COMMON
Freguency at 28.5MHz
28.5MHz terminals


709089L15PF8 Applications


There are a lot of Integrated Device Technology (IDT)
709089L15PF8 Memory applications.


  • personal computers
  • servers
  • supercomputers
  • telecommunications
  • workstations,
  • DVD disk buffer
  • data buffer
  • nonvolatile BIOS memory
  • Camcorders
  • embedded logic

Get Subscriber

Enter Your Email Address, Get the Latest News