Welcome to Hotenda.com Online Store!

logo
userjoin
Home

7037L20PFI

7037L20PFI

7037L20PFI

Integrated Device Technology (IDT)

5V V Surface Mount 100 Pin Memory IC 576 kb kb 14mm mm 18b b

SOT-23

7037L20PFI Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Factory Lead Time 7 Weeks
Mount Surface Mount
Package / Case TQFP
Number of Pins 100
Published 2009
JESD-609 Code e0
Pbfree Code no
Part StatusActive
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 100
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature85°C
Min Operating Temperature -40°C
Additional FeatureINTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN; LOW POWER STANDBY MODE
Subcategory SRAMs
Technology CMOS
Terminal Position QUAD
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Terminal Pitch0.5mm
Time@Peak Reflow Temperature-Max (s) 20
Pin Count100
Operating Supply Voltage5V
Power Supplies5V
Temperature GradeINDUSTRIAL
Interface Parallel
Max Supply Voltage5.5V
Min Supply Voltage4.5V
Memory Size72kB
Number of Ports2
Memory TypeRAM, SDR, SRAM
Access Time 20 ns
Output Characteristics 3-STATE
Address Bus Width30b
Density 576 kb
I/O Type COMMON
Sync/Async Asynchronous
Word Size18b
Length 14mm
Height Seated (Max) 1.6mm
Width 14mm
Thickness 1.4mm
Radiation HardeningNo
RoHS StatusRoHS Compliant
Lead Free Contains Lead
In-Stock:1190 items

7037L20PFI Product Details

7037L20PFI Overview


As far as memory types are concerned, RAM, SDR, SRAM is considered to be its memory type. In the case of TQFP, it is embedded within the case. A memory chip with a capacity of 72kB is used on this device. On the chip, there are 100 terminations that are planted. The part supports at least 1 functions to ensure a comprehensive working process. In order to function properly, this ic memory chip should be powered by a voltage of 5V. The memory device has an 100-pin package, which encloses it in a small package. I have noticed that the memory device has 100 pins, which indicates that it has 100 locations in the memory. According to the datasheet, this memory chip operates at an operating voltage of 5V. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. The memory chip also offers INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN; LOW POWER STANDBY MODE to level up system performance despite its merits. The memory chip has 2 ports for granting read/write access to one memory address. There is only a single power supply required for this memory chip. There are I/O ports on this memory ics that have COMMON-bit memory mapping. Temperatures below -40°C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 85°C, otherwise damage to the part may occur as a result of overheating. In most cases, this memory ics is regarded as being a type of SRAMs. It is recommended that this part be supplied with at least 4.5V volts. The operating voltage shall not exceed 5.5V.

7037L20PFI Features


Package / Case: TQFP
100 Pins
Operating Supply Voltage:5V
Additional Feature:INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN; LOW POWER STANDBY MODE
I/O Type: COMMON


7037L20PFI Applications


There are a lot of Integrated Device Technology (IDT)
7037L20PFI Memory applications.


  • servers
  • supercomputers
  • telecommunications
  • workstations,
  • DVD disk buffer
  • data buffer
  • nonvolatile BIOS memory
  • Camcorders
  • embedded logic
  • eDRAM

Get Subscriber

Enter Your Email Address, Get the Latest News