7027L20PFGI8 Overview
RAM, SDR, SRAM is the type of memory it has. The TQFP case contains it. The chip has an 64kB memory. The chip has 100 terminations. For a comprehensive working procedure, this part supports as many as 1 functions. In order to operate this memory device, it must be supplied with 5V of power. The memory device is enclosed in a package with an 100-pin connector. There are 100 pins on this memory device, which indicates it has 100 memory locations in it. A voltage of 5V is noted as the operating supply voltage for this memory. In this chip, Surface Mount mounting is used, a straightforward, high-efficiency mounting method. In terms of its nominal supply current, this memory component is rated at 335mA. Despite all its merits, this chip also features INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN; LOW POWER STANDBY MODE to boost system performance. A memory address is accessed through 2 ports on this chip. When it comes to power supplies, this memory chip only requires 5V . I/O port addresses on this device are mapped to memory addresses of COMMON bits. This device must operate at a minimum temperature of -40°C. Temperatures no higher than 85°C degrees Celsius are recommended for operation. It is usually considered a type of SRAMs component. It is recommended that the minimum supply voltage for this part be no less than 4.5V. Ideally, this part should be supplied with a voltage of at least 5.5V.
7027L20PFGI8 Features
Package / Case: TQFP
100 Pins
Operating Supply Voltage:5V
Additional Feature:INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN; LOW POWER STANDBY MODE
I/O Type: COMMON
7027L20PFGI8 Applications
There are a lot of Integrated Device Technology (IDT)
7027L20PFGI8 Memory applications.
- cell phones
- eSRAM
- mainframes
- multimedia computers
- networking
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
