7025S55JI8 Overview
A RAM, SDR, SRAM-type memory can be classified as the memory type of this device. You can get memory ics in a Tape & Reel case. Embedded in the PLCC case, memory ics is a single file. There is an 16kB memory capacity on the chip. On the chip, there are 84 terminations that are planted. The comprehensive working procedure of this part involves 1 functions. This ic memory chip is designed to be supplied with 5V. This memory device is enclosed in a 84-pin package. I have noticed that the memory device has 84 pins, which indicates that it has 84 locations in the memory. This memory's operating supply voltage is 5V. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. As far as the nominal supply current of this memory component is concerned, it is rated at 300mA. In spite of all the merits this chip has, it also features BATTERY BACK UP to level up system performance. 2 ports allow read/write access to one memory address in this chip. As for the power supply, this memory chip only needs 5V . There are COMMON-bit addresses mapped into the memory for I/O ports on this device. There must not be a minimum operating temperature of less than -40°C for this device. A temperature of no more than 85°C centigrade is recommended for the component to be operated, otherwise, damage might be inflicted on the component. Usually, this memory ics is regarded as a type of SRAMs. If this part is to be used, the minimum supply voltage should not be less than 4.5V volts. There shall be a voltage limit of 5.5V for its operation.
7025S55JI8 Features
Package / Case: PLCC
84 Pins
Operating Supply Voltage:5V
Additional Feature:BATTERY BACK UP
I/O Type: COMMON
7025S55JI8 Applications
There are a lot of Integrated Device Technology (IDT) 7025S55JI8 Memory applications.
- data buffer
- main computer memory
- mainframes
- Camcorders
- servers
- graphics card
- eSRAM
- cell phones
- personal digital assistants
- printers
