7025L45J Overview
There is a memory type RAM, SDR, SRAM for this type of device. The file is embedded in a PLCC case. This chip has an 16kB size of memory on it, so a lot of data can be stored on it. The chip contains 84 terminations. As many as 1 functions are supported for comprehensive working. An 5V supply is required for this ic memory chip to operate properly. A package of 84 pins is used to protect this memory device. The memory device has 84 pins, which means that it has 84 memory locations, which indicates it is an 84-bit device. This memory runs on an 5V operating supply voltage. Memory chips configured with Surface Mount mounting achieve high efficiency and simplicity. Although it has all the merits this chip has, it is also equipped with INTERRUPT FLAG; ARBITER; SEMAPHORE to give a performance boost to the system. Each memory address is accessed by one of 2 ports on this chip. The power supply needed for this memory chip is only 5V . An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an 0°C operating temperature for this device. The part should not be operated at temperatures above 70°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. The component is usually referred to as a type of SRAMs. This part should have a minimum supply voltage of 4.5V. A maximum voltage of 5.5V shall be allowed for its operating voltage.
7025L45J Features
Package / Case: PLCC
84 Pins
Operating Supply Voltage:5V
Additional Feature:INTERRUPT FLAG; ARBITER; SEMAPHORE
I/O Type: COMMON
7025L45J Applications
There are a lot of Integrated Device Technology (IDT)
7025L45J Memory applications.
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
