Name: 7009L15PFG8
Brand: Integrated Device Technology (IDT)
SKU: 7009L15PFG8
Price: 106.21000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	7 Weeks
Mount	Surface Mount
Package / Case	TQFP
Mounting Type	Surface Mount
Number of Pins	100
Supplier Device Package	100-TQFP (14x14)
Packaging	Tape & Reel
Published	2008
Operating Temperature	0°C ~ 70°C (TA)
Series	--
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	100
Terminal Finish	Matte Tin (Sn) - annealed
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Voltage - Supply	4.5 V ~ 5.5 V
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	IDT7009
Pin Count	100
Operating Supply Voltage	5V
Power Supplies	5V
Temperature Grade	COMMERCIAL
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Memory Size	1Mb (128K x 8)
Number of Ports	2
Nominal Supply Current	340mA
Memory Type	RAM, SRAM
Access Time	15 ns
Memory Format	SRAM
Memory Interface	Parallel
Output Characteristics	3-STATE
Write Cycle Time - Word, Page	15ns
Address Bus Width	17b
Density	1 Mb
Standby Current-Max	0.003A
I/O Type	COMMON
Sync/Async	Asynchronous
Word Size	8b
Length	14mm
Height Seated (Max)	1.6mm
Width	14mm
Thickness	1.4mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free

7009L15PFG8 Product Details

7009L15PFG8 Overview

In this case, the memory type of the device can be classified as RAM, SRAM. Case Tape & Reel is available. An embedded TQFP case surrounds memory ics. It is estimated that the memory size on the chip is 1Mb (128K x 8). As with most mainstream devices, this one uses SRAM-format memory. Due to its wide temperature range of 0°C ~ 70°C (TA), this device is well suited to a wide range of applications that require high performance. With 4.5 V ~ 5.5 V as the supply voltage, it is capable of handling memory ics. It is recommended to mount it in the Surface Mount mounting type. It is planted on the chip with 100 terminations. It supports up to 1 functions for comprehensive operation. There is a requirement for 5V to be supplied to this ic memory chip in order to operate. A device's base part number, IDT7009, is often used in order to identify similar components. The ic memory chip comes in a package with 100 pins that allows it to be connected to a computer. The memory device has a total of 100 pins, thus indicating that it has a total of 100 memory locations. It is noted that the operating supply voltage of this memory is 5V. This chip uses Surface Mount mounting, a straightforward, high-efficiency method of mounting. It is rated 340mA for its nominal supply current when it comes to the memory component. Several ports on this chip are used to access one memory address for reading and writing. In terms of power requirements, this memory chip uses only 5V . I/O port addresses in this device are mapped to COMMON bits from the device's memory. This part, which belongs to the -- series of memory devices, plays an important role in its target applications. In order for this device to function properly, its operating temperature must not be less than 0°C. The temperature should not exceed 70°C degrees Celsius. This memory ics should not be operated with a voltage below 4.5V volts at the minimum. There shall be a voltage limit of 5.5V for its operation.