7008S15J8 Overview
There is a memory type RAM, SDR, SRAM for this type of device. The file is embedded in a PLCC case. This chip has an 64kB size of memory on it, so a lot of data can be stored on it. The chip contains 84 terminations. As many as 1 functions are supported for comprehensive working. An 5V supply is required for this ic memory chip to operate properly. A package of 84 pins is used to protect this memory device. The memory device has 84 pins, which means that it has 84 memory locations, which indicates it is an 84-bit device. This memory runs on an 5V operating supply voltage. Each memory address is accessed by one of 2 ports on this chip. The power supply needed for this memory chip is only 5V . An COMMON-bit memory mapped I/O port address is used to address this device. There must be at least an 0°C operating temperature for this device. The part should not be operated at temperatures above 70°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. This device can be operated from a maximum supply current of 0.365mA under ideal conditions. The component is usually referred to as a type of SRAMs. This part should have a minimum supply voltage of 4.5V. A maximum voltage of 5.5V shall be allowed for its operating voltage.
7008S15J8 Features
Package / Case: PLCC
84 Pins
Operating Supply Voltage:5V
I/O Type: COMMON
7008S15J8 Applications
There are a lot of Integrated Device Technology (IDT)
7008S15J8 Memory applications.
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
