7006S35G Overview
RAM, SDR, SRAM is its memory type. In addition, memory ics is available in a Bulk case as well. 16kB is the chip's memory size. On the chip, there are 68 terminations that are planted. For a comprehensive working procedure, this part supports as many as 1 functions. A voltage of 5V is required for the operation of this memory device. The memory device has an 68-pin package, which encloses it in a small package. It is worth noting that this memory device has 68 pins, which indicates it has 68 memory locations. It is noted that the operating supply voltage of this memory is 5V. It uses Through Hole mounting, which is an efficient, straightforward mounting method. As far as the nominal supply current of this memory component is concerned, it is rated at 250mA. This chip is not only loaded with advantages, but it also comes with INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN, which boosts the performance of your system. In this chip, there are 2 ports providing read and/or write access to one memory address. This memory chip requires only 5V of power. An COMMON-bit memory mapped I/O port address is used to address this device. This device must operate at a minimum temperature of 0°C. It should not be operated above 70°C°C. The component is usually referred to as a type of SRAMs. It is recommended that the minimum supply voltage for this part be no less than 4.5V. Ideally, this part should be supplied with a voltage of at least 5.5V.
7006S35G Features
68 Pins
Operating Supply Voltage:5V
Additional Feature:INTERRUPT FLAG; SEMAPHORE; AUTOMATIC POWER-DOWN
I/O Type: COMMON
7006S35G Applications
There are a lot of Integrated Device Technology (IDT) 7006S35G Memory applications.
- telecommunications
- hard disk drive (HDD)
- data buffer
- embedded logic
- Camcorders
- Cache memory
- DVD disk buffer
- graphics card
- eSRAM
- workstations,
