7006L45J Overview
Its memory type can be classified as RAM, SDR, SRAM. There is a PLCC case embedded in it. It is estimated that the memory size on the chip is 16kB. As you can see from the diagram, the chip is planted with 68 terminations. In total, this part supports 1 functions. There is a requirement for 5V to be supplied to this ic memory chip in order to operate. It is encased in an 68-pin package that contains this ic memory chip. The memory device has a total of 68 pins, thus indicating that it has a total of 68 memory locations. According to the datasheet, this memory chip operates at an operating voltage of 5V. This chip is configured to use Surface Mount mounting, a straight forward, high-efficiency mounting fashion. Despite all its benefits, this memory chip also offers INTERRUPT FLAG; ARBITER; SEMAPHORE for improved system performance. This memory chip has 2 ports for accessing one memory address via read or write. As for the power supply, this memory chip only needs 5V . I/O port addresses on this device are mapped to memory addresses of COMMON bits. Temperatures below 0°C should not be used with this memory ics. The part should not be operated at temperatures above 70°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. It is usually considered a type of SRAMs component. It is recommended that the minimum supply voltage for this part be no less than 4.5V. There shall be a voltage limit of 5.5V for its operation.
7006L45J Features
Package / Case: PLCC
68 Pins
Operating Supply Voltage:5V
Additional Feature:INTERRUPT FLAG; ARBITER; SEMAPHORE
I/O Type: COMMON
7006L45J Applications
There are a lot of Integrated Device Technology (IDT) 7006L45J Memory applications.
- mainframes
- Camcorders
- printers
- telecommunications
- data buffer
- DVD disk buffer
- servers
- networks
- supercomputers
- personal digital assistants
