7006L45FB Overview
As far as memory types are concerned, RAM, SDR, SRAM is considered to be its memory type. In addition, memory ics is available in a Bulk case as well. A memory chip with a capacity of 16kB is used on this device. On the chip, there are 68 terminations that are planted. The part supports at least 1 functions to ensure a comprehensive working process. In order to function properly, this ic memory chip should be powered by a voltage of 5V. The memory device has an 68-pin package, which encloses it in a small package. I have noticed that the memory device has 68 pins, which indicates that it has 68 locations in the memory. The memory chip has 2 ports for granting read/write access to one memory address. There is only a single power supply required for this memory chip. There are I/O ports on this memory ics that have COMMON-bit memory mapping. Temperatures below -55°C should not be used with this memory ics. It is recommended that operation of the part be restricted to temperatures not exceeding 125°C, otherwise damage to the part may occur as a result of overheating. As far as the supply current is concerned, it can be operated with a maximum of 0.34mA of currentIn most cases, this memory ics is regarded as being a type of SRAMs. It is recommended that this part be supplied with at least 4.5V volts. The operating voltage shall not exceed 5.5V.
7006L45FB Features
68 Pins
I/O Type: COMMON
7006L45FB Applications
There are a lot of Integrated Device Technology (IDT)
7006L45FB Memory applications.
- servers
- supercomputers
- telecommunications
- workstations,
- DVD disk buffer
- data buffer
- nonvolatile BIOS memory
- Camcorders
- embedded logic
- eDRAM
