7005S35JI8 Overview
There is a RAM, SDR, SRAM memory type associated with this device. There is a Tape & Reel case available. The case is embedded in PLCC. There is an 8kB memory capacity on the chip. 68 terminations are planted on the chip. In total, 1 functions are supported by this part. In order to power this memory device, 5V will be necessary. It is encased in an 68-pin package that contains this ic memory chip. The memory device in question has 68 pins, thus indicating that it has 68 memory locations that can be accessed. It is noted that the operating supply voltage of this memory is 5V. Despite all its benefits, this memory chip also offers INTERRUPT FLAG; AUTOMATIC POWER-DOWN; SEMAPHORE for improved system performance. Several ports on this chip are used to access one memory address for reading and writing. The power supply needed for this memory chip is only 5V . A memory mapped I/O port address of COMMON bits is used in this device. There must not be a minimum operating temperature of less than -40°C for this device. As a general rule, memory ics is recommended that the product be operated at temperatures no higher than 85°Cc, otherwise, damage could be done to it. In order to operate your device, you will need to provide a maximum supply current of 0.3mA. It is usually considered a type of SRAMs component. This memory ics should not be operated with a voltage below 4.5V volts at the minimum. Its operating voltage shall not exceed 5.5V.
7005S35JI8 Features
Package / Case: PLCC
68 Pins
Operating Supply Voltage:5V
Additional Feature:INTERRUPT FLAG; AUTOMATIC POWER-DOWN; SEMAPHORE
I/O Type: COMMON
7005S35JI8 Applications
There are a lot of Integrated Device Technology (IDT) 7005S35JI8 Memory applications.
- supercomputers
- graphics card
- nonvolatile BIOS memory
- embedded logic
- Cache memory
- servers
- personal digital assistants
- workstations,
- main computer memory
- Camcorders
