6116SA150DB Overview
RAM, SDR, SRAM - Asynchronous is the type of memory it has. There is a Bulk case available. The CDIP case contains it. The chip has an 2kB memory. The chip has 24 terminations. For a comprehensive working procedure, this part supports as many as 1 functions. In order to operate this memory device, it must be supplied with 5V of power. The memory device is enclosed in a package with an 24-pin connector. There are 24 pins on this memory device, which indicates it has 24 memory locations in it. A voltage of 5V is noted as the operating supply voltage for this memory. A memory address is accessed through 1 ports on this chip. When it comes to power supplies, this memory chip only requires 5V . I/O port addresses on this device are mapped to memory addresses of COMMON bits. This device must operate at a minimum temperature of -55°C. Temperatures no higher than 125°C degrees Celsius are recommended for operation. A maximum supply current of 0.09mA can be used to operate this device. It is usually considered a type of SRAMs component. It is recommended that the minimum supply voltage for this part be no less than 4.5V. Ideally, this part should be supplied with a voltage of at least 5.5V.
6116SA150DB Features
Package / Case: CDIP
24 Pins
Operating Supply Voltage:5V
I/O Type: COMMON
6116SA150DB Applications
There are a lot of Integrated Device Technology (IDT)
6116SA150DB Memory applications.
- cell phones
- eSRAM
- mainframes
- multimedia computers
- networking
- personal computers
- servers
- supercomputers
- telecommunications
- workstations,
