552AR01LFT Overview
Clock ICs are packaged using the Tape & Reel method. In the QSOP package, there is an embedded clock generator. A maximum temperature of NOT SPECIFIED can be sustained by this clock generator ic during reflowing. There are a total of 20 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. In this case, Clock is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 200MHz. There is a maximum voltage of 5.5V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. An IC that generates clocks specifically for microprocessors, this clock PLL is 20-bits in si20e. A 20 pin is available on the clock PLL. In addition to having an impressive low-temperature performance, this clock device can perform 0°C operations simultaneously. This RF synthesizer can last with attenuated performance at 70°C.
552AR01LFT Features
Available in the QSOP
Supply voltage of 3.3V
552AR01LFT Applications
There are a lot of Integrated Device Technology (IDT)
552AR01LFT Clock Generators applications.
- Wide area power system
- Digital circuits
- Wireless base station for LTE, LTE-advanced
- Picocells, femtocells and small cells
- Sampling clocks for ADC and DAC
- 1 Gigabit Ethernet
- 10 Gigabit Ethernet
- FPGA and processor clocks
- Line cards used in telephone exchange
- Fiber Channel
