ICS9112AF-17 Overview
The Tape & Reel (TR) method is used for packaging clock ICs. As part of the TSSOP package, this clock generator is embedded. This clock generator ic can sustain NOT SPECIFIED degrees of temperature during reflowing. There are 16 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. In this clock generator, LVTTL is used as the input to the clock. For a full understanding of the electronic part's performance, 1 circuits are implemented. An up to 200MHz frequency is provided by this clock-based RF synthesizer. 3.63V would be the maximum supply voltage for this clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 2.97V. It is a 16-bit clock PLL designed specifically for microprocessors. There are 0°C operations that can be performed on this clock generator, which has impressive low-temperature performance. At 70°C, this RF synthesizer remains functional despite reduced performance. In general, this clock PLL is considered a Clock Drivers device. There is a ALSO OPERATES WITH 5V SUPPLY feature on this frequency generator in order to produce a better clock signal. Low timing skew is offered by this RF synthesizer at maximum 0.25 ns. The digital clock generator has 8 high-enable output pins. PLL BASED CLOCK DRIVER logic circuits are primarily constructed using this time clock generator.
ICS9112AF-17 Features
Available in the TSSOP
Supply voltage of 3.3V
8 true outputs
ICS9112AF-17 Applications
There are a lot of Integrated Circuit Systems
ICS9112AF-17 Clock Generators applications.
- Wireless base station for LTE, LTE-advanced
- Picocells, femtocells and small cells
- Sampling clocks for ADC and DAC
- 1 Gigabit Ethernet
- 10 Gigabit Ethernet
- FPGA and processor clocks
- Line cards used in telephone exchange
- Fiber Channel
- PCI express cards
- Infotainment systems
