Name: ITS4060SSJNXUMA1
Brand: Infineon Technologies
SKU: ITS4060SSJNXUMA1
Price: 2.07000 USD
Availability: InStock

new-10%

ITS4060SSJNXUMA1

Manufacturer part number:ITS4060SSJNXUMA1

Manufacturer:Infineon Technologies

Description:N-Channel PMIC 8 Pin 13.5V 8-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:ITS4060SSJNXUMA1 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
Published	1999
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	8
ECCN Code	EAR99
Resistance	120mOhm
Terminal Finish	Tin (Sn)
Max Power Dissipation	1.5W
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	1
Supply Voltage	13.5V
[email protected] Reflow Temperature-Max (s)	NOT SPECIFIED
Number of Outputs	1
Output Type	N-Channel
Operating Supply Voltage	34V
Interface	On/Off
Current - Output (Max)	2.6A
Nominal Supply Current	800μA
Output Configuration	High Side
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Turn On Delay Time	180 μs
Switch Type	General Purpose
Halogen Free	Halogen Free
Nominal Input Voltage	13.5V
Turn-Off Delay Time	230 μs
Ratio - Input:Output	1:1
Voltage - Load	5V~34V
Fault Protection	Current Limiting (Fixed), Over Temperature, Over Voltage
Output Peak Current Limit-Nom	3.1A
Rds On (Typ)	50m Ω
Built-in Protections	TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Output Current Flow Direction	SOURCE
Length	5mm
Width	4mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

ITS4060SSJNXUMA1 Product Details

ITS4060SSJNXUMA1 Overview

A Tape & Reel (TR) is used to package it.There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.A Surface Mount mounting is used for the LED driving board.There is a General Purpose switch type associated with it.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.By default, it is set to output 1.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It contains 8 terminations.In order to operate, the 8 pins are used.Currently, the lighting driver has a total of 1 functions.This LED driver has a maximum output of 2.6AV.The supply voltage can be 13.5V for high efficiency.Surface Mount is mounted in the way.Currently, the LED driving board has a resistance of 120mOhm ohms.It is recommended to set the supply voltage to 34V for optimum efficiency.