IR2213PBF Overview
Its 14-DIP (0.300, 7.62mm) package is adopted for higher flexibility.A package of Tube has been used.Ideally, it should be mounted in the direction of Through Hole.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 12V~20V.This device is designed with a IGBT, N-Channel MOSFET gate type.This device allows temperatures in the range of -55°C~150°C TJ.Input type of Non-Inverting is used.Initially, the configuration is composed of 14 terminations.Numerous related parts can be found under its base part number IR2213PBF.The device is mounted using Through Hole.A total of 14 pins are available on the device.In addition, it is specifically designed to operate with a supply voltage of 15V.In the maximum case, the output current can be 2.5A volts.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.A boot strap voltage of 1200V is the maximum possible high-side voltage.In terms of its basis, there are 2 outputs integrated.The output current supported by the device is 2A.According to its maximum power dissipation, 1.6W is capable of conducting and transferring a large amount of power without overheating.For higher stability, the supply current should be kept at 340μA.Based on its power supplies of 15V, it solves the problem of power supply failure for a variety of applications.In this case, it outputs 1.22kV voltage.The supply voltage is 340μA.
IR2213PBF Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 1200V
Maximum power dissipation of 1.6W
IR2213PBF Applications
There are a lot of Infineon Technologies IR2213PBF gate drivers applications.
- Dual-Battery Systems
- RGB applications
- Power factor correction (PFC) circuits
- Telecom switch mode power supplies
- Automotive Applications
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High-voltage isolated DC-DC converters
- High-speed communications
- Motor Control
- Refrigerator
