Name: IPS031S
Brand: Infineon Technologies
SKU: IPS031S
Availability: InStock

new-10%

IPS031S

Manufacturer part number:IPS031S

Manufacturer:Infineon Technologies

Description:N-Channel 2.54mm PMIC IPS031S 14V TO-263-3, D2Pak (2 Leads + Tab), TO-263AB

Case Package:SOT-23

Datasheet:IPS031S Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	12 Weeks
Mounting Type	Surface Mount
Package / Case	TO-263-3, D2Pak (2 Leads + Tab), TO-263AB
Surface Mount	YES
Operating Temperature	-40°C~150°C TJ
Packaging	Tube
Published	2001
JESD-609 Code	e0
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	2
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn/Pb)
Terminal Position	SINGLE
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	225
Number of Functions	1
Supply Voltage	14V
Terminal Pitch	2.54mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	IPS031S
JESD-30 Code	R-PSSO-G2
Number of Outputs	1
Qualification Status	Not Qualified
Output Type	N-Channel
Supply Voltage-Max (Vsup)	35V
Interface	On/Off
Current - Output (Max)	2.8A
Output Configuration	Low Side
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Switch Type	General Purpose
Ratio - Input:Output	1:1
Voltage - Load	35V Max
Fault Protection	Current Limiting (Fixed), Over Temperature
Turn On Time	0.6 µs
Output Peak Current Limit-Nom	10A
Rds On (Typ)	45m Ω
Turn Off Time	3.5 µs
Built-in Protections	OVER CURRENT; THERMAL
Output Current Flow Direction	SINK
Height Seated (Max)	4.69mm
Width	8.79mm
RoHS Status	Non-RoHS Compliant

IPS031S Product Details

IPS031S Overview

It is packaged in the form of a Tube.It is included with the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package as well.It has been mounted as Surface Mount on the LED driver.This switch is of type General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has a total of 1 outputs.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The IPS031S family consists of this type.As a result, there are 2 terminations.The LED driving board has a total of 1 functions.This LED driver has a maximum output of 2.8AV.As long as the supply voltage is 14V, high efficiency can be achieved.The Vsup value (maximum supply voltage) is set to 35V.