BTS3104SDLATMA1 Overview
It is packaged in the form of a Tape & Reel (TR).It is included in the package TO-252-3, DPak (2 Leads + Tab), SC-63.It has been mounted as Surface Mount on the LED driver.It owns General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.It is possible to use 1 outputs in the lighting driver.Operation is based on Not Required supply voltage.There is a maximum output voltage of N-Channel volts.The BTS3104 family contains this object.As a result, there are 2 terminations.It is important to note that the LED driving board has 1 functions.Maximum output current falls to 2A when operation criteria are met.Using a voltage of 13.5V allows for high efficiency.The LED driving board is mounted in the way of Surface Mount.A total of 4 pins are included in this LED driver.This electrical component is included in the HITFET? series.When this case is used, the output current is set to 2A.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 8V.
BTS3104SDLATMA1 Features
Supplied from 13.5V
BTS3104SDLATMA1 Applications
There are a lot of Infineon Technologies BTS3104SDLATMA1 Power Switches ICs applications.
- PC Card Hot Swap
- Notebook PC
- Storage Drives
- Hot Swap
- Hard Disk Drives
- Various applications equipped with buttons
- Portable Music Players
- Wearable Devices
- Low Voltage I/O System Power
- Solid State Drivers
