Name: BTS3060TFATMA1
Brand: Infineon Technologies
SKU: BTS3060TFATMA1
Price: 1.63000 USD
Availability: InStock

new-10%

BTS3060TFATMA1

Manufacturer part number:BTS3060TFATMA1

Manufacturer:Infineon Technologies

Description:N-Channel 2.28mm PMIC HITFET? Series 5V TO-252-3, DPak (2 Leads + Tab), SC-63

Case Package:SOT-23

Datasheet:BTS3060TFATMA1 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	18 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	TO-252-3, DPak (2 Leads + Tab), SC-63
Operating Temperature	-40°C~150°C TJ
Packaging	Tape & Reel (TR)
Published	2014
Series	HITFET®
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	2
Terminal Position	SINGLE
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.28mm
[email protected] Reflow Temperature-Max (s)	NOT SPECIFIED
JESD-30 Code	R-PSSO-G2
Number of Outputs	1
Output Voltage	42V
Output Type	N-Channel
Max Output Current	3A
Supply Voltage-Min (Vsup)	4V
Interface	On/Off
Nominal Supply Current	310μA
Output Configuration	Low Side
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Switch Type	General Purpose
Halogen Free	Halogen Free
Drain to Source Voltage (Vdss)	42V
Nominal Input Voltage	5.5V
Ratio - Input:Output	1:1
Voltage - Load	42V Max
Max Dual Supply Voltage	42V
Fault Protection	Current Limiting (Fixed), Over Temperature, Over Voltage
Turn On Time	76 μs
Output Peak Current Limit-Nom	3A
Rds On (Typ)	50m Ω
Built-in Protections	OVER CURRENT; THERMAL; TRANSIENT
Output Current Flow Direction	SINK
Height Seated (Max)	2.5mm
Length	6.5mm
Width	6.22mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

BTS3060TFATMA1 Product Details

BTS3060TFATMA1 Overview

It is package in Tape & Reel (TR) case.This package is included in TO-252-3, DPak (2 Leads + Tab), SC-63.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.There are 1 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage is N-Channel volts.As a result, there are 2 terminations.The LED driving board has a total of 1 functions.Maximum output current falls to 3A when operation criteria are met.As long as the supply voltage is 5V, high efficiency can be achieved.It is positioned in the direction of Surface Mount.These electrical components are part of the HITFET? series.Normal operation requires a voltage above 4V for the supply voltage.